J P Fire Safety

The RE - 337 S addressable detectors are designed to work with Moniti Panel. These detectors are low profile and have dual LED’s for 360 visual indication. The whereas the steady state indicates fire status.

 

 

Detector addressing is electrically programmed into the detector at the time of installation.

 

 

It has an unique chamber designed to sense smoke produced by wide range of sources of combustion. The detectors sensitivity can be programmed through Fire Alarm Control Panel. It has a unique drift compensation feature detector adjusts its normal reference based on environment conditions. blinking LED's indicate normal operating conditions.

Features:

• Complies with EN 54.
• Dual LEDs for 360 visibility.
• Advanced detection and communication protocol.
• Stable photoelectric smoke sensing chamber. No adjustment or replacement required
• Polarity insensitive.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple Soft address programming for Easy installation.

RE-717MC Control Module is the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The output circuit is supervised for faulty condition.

Features:

• Indian Manufacturer - International Standard.
• UL-Listed (9th Edition).
• Modular Construction.
• Supervised a Class ‘B’ Style ‘Y’ output circuit.
• Module Status by RED LED.
• Analogue Communication with the panel.
• Module Addressing by 8 way DIP switches.
• Low Standby Current.
• Available with suitable back boxes.

The RE 337H addressable detectors are designed to work with Avani Panel. These detectors are low profile and have dual LED’s for 360 visual indication. The LED’s are blinking in normal operating condition whereas the steady state indicates fire status.

Detector addressing is electronically programmed into the detector at the time of installation.

RE 337H is a fixed cum rate of rise heat detector using a thermistor. These detectors will raise an alarm when the detector reaches 59 C(Fixed) or when the change in temperature exceeds the rate of rise of 11 C / min

Features:

• Complies with EN 54.
• CE Approved.
• Dual LED’s for 360 visibility.
• Durable sensor. No adjustment or replacement required.
• Advanced detection and communication protocol.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple Soft address programming for Easy installation.

RE-737MM Monitor Module facilitates third party devices to interface with Ravel make addressable panel. Monitor Module is an input interface device for devices like security contacts, waterflow switches, pull stations etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Monitor circuit is supervised forfaulty condition. The module Addressing is done by soft addressing method through Programming tool or through the panel.

Features:

• Inbuilt Isolator.
• Module Status by RED LED.
• Analogue Communication with the panel.
• Soft addressing using Programming Tool.
• Low Standby Current.
• Available with suitable back boxes.

RE-737MR Relay Module facilitates third party devices to interface with Ravel make addressable panel. Relay modules are the remote devices to activate / de-activate any device or instrument or unit using the potential free contacts. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The Module addressing is done by soft addressing method through a Programming Tool or through panel.

Features:

• Inbuilt Isolator.
• Module Status by RED LED.
• Analogue Communication with the panel.
• Soft Addressing using programming tool.
• Low Standby Current.
• Available with suitable back boxes.

RE-737MC Control Module are the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. The output circuit is supervised for faulty condition. The Module addressing is done by soft addressing method through Programming Tool or through the panel.

Features:

• Inbuilt Isolator.
• Supervised a Class ‘B’ Style ‘Y’ output circuit.
• Module Status by RED LED.
• Analogue Communication with the panel.
• Soft Addressing using Programming Tool.
• Low Standby Current.
• Available with suitable back boxes.

Addressable photoelectric smoke detectors are designed to work with Addressable panel. These photoelectric smoke detectors are low profile, polarity free, and have dual LED’s for360 o visual indication. The LED’s are blinking in normal operating condition whereas the steady state indicates fire status. It has an unique chamber designed to sense smoke produced by wide range of sources of combustion with insect free. The detectors sensitivity can be programmed through fire alarm control panel. It has a unique drift compensation where the detector adjusts its normal reference based on environment conditions.


Features:

• UL listed and NFPA standard.
• Polarity free, and Dual LED’s for 360o visibility.
• Advanced detection and communication protocol.
• Easy to install.
• Sleek low‐profile housing design.
• Regular 100mm base.
• Address set by 8 digit DIP switch.

Avani is an analogue addressable having an extensive lost of powerful features.The panel has maximum capacity for four loopcards plug in type. On board USB port,on board RS-485 connectivity and touch keypad.Each loop can supports upto 254 devices of any combination and single panel shall support upto 1016 devices of any combination.Higher loop requirement can be catered by using the in bulit networking features of the Fire Alarm Control Panel. Modules & Ethernet connectivity optional connectivity of modbus converter & Ethernet is

The RE 337SH addressable detectors are designed to work with Moniti Panel. These detectors are low profile and have dual LED’s for 360O visual indication. T whereas the steady state indicates fire status.

Detector addressing is electrically programmed into the detector at the time of installation.

The fixed cum rate of rise heat detector works using a thermistor. These detectors will raise an alarm when the detector reaches 59O C(Fixed) or when the change in temperature exceeds the rate of rise of 11O C / min.It has an unique chamber designed to sense smoke produced by wide range of sources of combustion. The detectors sensitivity can be programmed through the fire alarm control panel. It has a unique drift compensation feature where the detector adjusts its normal reference based on environment conditions.

Features:

• Complies with EN 54.
• CE Approved.
• Dual LED’s for 360 visibility.
• Advanced detection and communication protocol.
• Stable photoelectric smoke chamber. (No adjustment or replacement required.)
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple soft address programming for easy installation.

The RE-737M Manual Call Point complies with latest standards and is designed to interface with addressable fire alarm panel. The RED blinking LED indicates normal operating condition. Activation of MCP is indicated by RED steady LED.

Features:

• Complies EN54-11.
• Type “A” Indoor Use
• Resettable by an element kit.
• Suitable for flush or surface mounting
• Inbuilt - Isolator
• Soft Addressing using programming tool.
• Low Standby Current.